Click Technology

Linux, Windows, Mac it's all good

Burn an ISO to a USB stick

February6

Every time I want to do this it seems to take waaay longer than it should. Here then, the instructions in n steps under Linux.


sudo lsblk

Check and see which device is your USB stick. In the commands below, the device is listed as /dev/sdaX, but in reality it will be /dev/sdc probably. Be careful. If you mis-select the device you could potentially DESTROY all your data, in which case you will have to go through all five stages of data recovery grief, namely..

Denial = “It wasn’t me

Anger = “How the fuck did I just do that? What was I thinking, cutting and pasting commands off the interwebs??

Bargaining = “If I reboot the machine, the data will probably come back. Actually, thats almost a certainty.

Depression = “Who suggested rebooting? What a stupid idea that was. I’m completely screwed. Why didn’t I do routine backups, especially of my thesis, my research, my entire music collection and all my photos since 2003.

Acceptance = “Either fork out for a data recovery company or start fresh with nothing.

Consider yourself warned. And also, make regular backups.

So, unmount the USB drive in question..


sudo umount /dev/sdX

Format it as FAT32


sudo mkdosfs -n 'usb-bootable' -I /dev/sdX -F 32

Run isohybrid..


sudo isohybrid /home/username/Downloads/systemrescuecd-x86-4.7.1.iso

Now burn the iso image to USB


sudo dd if=/home/username/Downloads/systemrescuecd-x86-4.7.1.iso of=/dev/sdX bs=4k

Flush data to the USB drive..


sudo sync

And eject the USB drive..


sudo eject /dev/sdX

Finished. Your USB pendrive is bootable and ready to go.

posted under Linux Tips

Comments are closed.

This is my website for short blog posts and interesting materials that are noteworthy or have some handy-tip value.